Instrument panel lighting

I just had another round with my van, the instrument illumination had gone out. All I had was the shift-selector and the odometer, the rest of the gauges were not lit. So– I had another round of trying to remove the panel.

First, removing the trim. This isn’t hard, you just pull on it until it comes loose. Have to shift to low gear to remove the trim for clearance. Then, 4 screws hold the instrument cluster in. Remove these 4 with a #7 mm socket. No problem there.

Now the problem. Something invisible refused to let go easily. It took much prodding, shifting, jiggling and some little bit of holding your tongue just right to convince it to come out. It has to come straight out as it happens, and it doesn’t want to. The power-plug was holding it in, and that plug in turn is clipped firmly to the dash framing. But, with much persuasion it does finally come out.

OK, now I have the instrument cluster out, and on the tailgate of the van where I can see and work on it. 6 large, black twist-sockets tell where the illumination is– the other twist-sockets are smaller and are warning lights and turn signals. So– a quarter turn and the socket is removed. GM decided, in their eternal brilliance, to solder the bulbs into the sockets. Fortunately, I was told about this in advance so I bought new sockets to go with the new bulbs. 6 new bulbs and sockets installed, and now for putting the whole thing back together. This is not easy, because I don’t have tilt-wheel in this van you have to work things around and use a slight amount of force to get it in. Line up the power plug with the power-socket– not easy, you’re doing this blind– and suddenly you’re in and it’s working. Replace the 4 screws, fight with the trim– that tilt-wheel would really help here– and then run the final test. It works, I have light again.

This was a bear, but I’ve had it worse. I had a ’91 Ford Econoline which gave me fits, and finally I had to replace the entire instrument panel– with one that I built from gauges I bought at the auto-parts store. Sun-Tune and Autometer gauges replaced the original Ford panel. The oil pressure and water temperature were actual mechanical gauges, I added a vacuum gauge and a real ammeter to the package. The speedometer required a replacement cable to bring that online, then I was in business. Took a whole weekend to build up that instrument panel, and it was real sweet to see everything work the first time.

Advertisements
Standard

6 thoughts on “Instrument panel lighting

    • Oops – no preview – the verb’s wrong.:yuck:
      Michael, as long if you’re gonna round up this place, would you consider learning if the host can add some crucial features here?

      • Unfortunately, it seems others have asked– notably Andy Watts, over at WUWT has asked. Nope, what we have is what we have.

        About the other thing: The odometer measures the distance you’ve traveled. In my case, it measures miles and shows this van has over half a million miles on it. Not bad for a Chevy 5.7 gasoline-powered engine.

    • I allowed the above, but have doctored it so all the links– ALL THE LINKS– have been neutralized. This was from a clueless bot spammer. I can tell it’s a bot because I keep getting the same thing over and over again. I can tell the “person” commenting is clueless because— hey, let’s be real here. Take a GOOD look at this blog and see if you can find whatever it is I’m trying to sell. Why on Earth would I need SEO for a blog which is only gonna get read by friends and family in the first place?

      In any case, a short study of SEO reveals that these days, that’s probably NOT the way to run your business. You end up chasing unicorns across endless rainbows, as the search engines change their algorithms to defeat the latest, greatest SEO attempts to game the system.

      Now, SEO “guy”—- if you’re too stupid to figure out what I, a truck-driver, have learned from a relatively short study—- why should I take any advice from you?? If you’re too stupid to figure out that sending bot-spam to old posts—- this one was started way back in October, fer cryin’ out loud– why should I believe you know ANYTHING about the latest greatest most up-to-datest ways to game the search engines? You don’t even know enough to place your spam in the most recent posts, where there’s a chance somebody might– oh, I don’t know— actually– you know— read it.

      I delete most of this crap on sight, it never gets posted to the comments because it gets caught in a filter where I look at it, determine it’s garbage, and dump it. However, of late it’s occurred to me that I might post a few, edited to neutralize the links, and poke a little fun at the clueless bot-army of spammers who think the entire Internet should be their commercial garbage-dump. I just may start doing that. Could be fun.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s